ANTICREVAISON
XTRM T3
Technical File
DEFINITION
XTRM T3 is a preventive and repairing tire sealant, designed to protect the tread area against punctures, porosity, and air leaks within the treated zone.
It works in both tube-type and tubeless tires.
The product contains no glue or latex and is a neutral formulation made from thousands of recycled rubber particles.
PERFORMANCE
Seals punctures up to 4 mm in diameter on the tread of tubeless tires, and up to 3–4 mm in tube-type tires.
APPLICATION
XTRM T3 tire sealant is suitable for a wide variety of vehicles, including lawn and garden equipment, ride-on mowers, trailers, ATVs/quads, bicycles, and motorcycles, as well as any other tire — with or without an inner tube — operating at speeds up to 100 km/h (60 mph).
PACKAGING
Available in 250 g, 500 g, 5 kg bottles or bulk containers on request.
INSTRUCTIONS FOR USE
-
Check the dosage required according to your tire size and application (see dosage chart).
-
Position the valve downward.
-
Unscrew the valve cap and remove the valve core to deflate the tire.
-
Inject the required quantity using the bottle, pouch, or syringe.
-
Reinstall the valve core and inflate the tire to its normal pressure.
-
Replace the valve cap and drive or rotate the tire for about 5 km (3 miles) to allow XTRM T3 to spread evenly inside.
NOTICE
XTRM SYSTEMS products are not aerosol puncture repair cans.
The containers do not contain any propellant gas for injection into the tires.
